|Inner Line is the Part
|Outer Line is the Toolpath the Cutter follows
click here to download Clamp250.zip file for clamp.dxf
click here to download clamp.txt gcode file
Clamp print for those who do not have a CNC.
Make a block to holder the part to be machined.
Make the block for 1/4-20 bolts on 3" centers. Drill 1/4" holes in the blank.
After Zeroing XYZ over the first hole on the block and bolting down the part to be cut.
Gcode Loaded in MACH 3 Mill
First Cutting Pass
Finished Cut make sure cutter clears bolt head.
Using some Scrap to make the parts, just drill the holes and bolt down to cut.
Finished Clamp Sides 4 needed for 2 Clamps
All the parts with 1/4-20 studs
More Clamp setups